Oral solution. . which solvent?

[smalls]

Propylene Glycol
Peg 400 (polyethylene glycol)

Which solvent will allow me to get the highest concentration of anavar in solution. I know most people can only get 20-25mg/ml with everclear. I was thinking maybe add a few ml of ba in there to get it to stay suspended at a bit higher dosage. BCC you probably have the most experience with this. It probably wont make much of a difference but which solvent would you guys suggest. (these two are what I already have and will be using, I wont be using everclear)

[Hatred]

Anavar? I don't know. I have PG for everything but if Anavar is anything like Winny you'll just use 151 or everclear.TRUST me on this.

[smalls]

Thanks nevermore. So I take it PG wouldnt hold the windogg. Supposedly Anavar is pretty hard to suspend.

No one else?

[BCC]

PG holds my winstrol fine as long as I put BA in it. I don't know what you're talking about Josh. I have my winstrol right now at 50mgs/ml and all i have to do is shake it up before each use. Everclear and 151 didn't hold my winstrol worth a ****. You had to shake and then speed draw before it all settled back at the bottom.

I think PEG400 would hold it at a higher concentration, but PG is more cost effective.

With PG I've done:

Anadrol 50mgs/ml
Dbol 50mgs/ml and 25mgs/ml
Winstrol 50mgs/ml and 25mgs/ml both worked about the same
Nolvadex 40mgs/ml

I was planning on trying 60mgs/ml with var when I get around to getting some.

[smalls]

Thanks BCC, I totally missed this post until now. I'm gonna add a little BA and try for it at 30mg/ml in PG. I figure I'll have to shake it before each draw either way. I have never heard of anyone getting it at higher than 25mg/ml. I can always just add more solvent if it doesnt hold.

I'll be doing it tommorow so I'll get back to you on how it goes, it will be my first oral solution.

Another question, does anyone know the shelf-life of powders, and will it be longer in the freezer. I've got enough drol and nolv to last a lifetime and plan on making it last that long.

[BCC]

My personal recommendation would have to be to not make it last that long (you'll get bigger that way ;) )

I don't see why they couldn't last a few years. I'm taking some winstrol that's over a year old now. I believe ST's stated before they can last a couple years in a cool, dry, dark place.

[Hatred]

Chase ,ask Charles about the winny I made. It was a disaster and has so much Ba in it that it is ridculous.
I think back then I partially expected it to suspend. Which it did not.
It took forever to unclump in heat. It is so Awful that it is still sitting in my cupboard. I have given it away twice and keep getting it back. LOL/

[smalls]

I figured I'd update you guys cuz I know BCC's gonna be making this soon. I made two different batches about a week ago but I lost the exact recipes I used since then, bleh, i'm no chemist. I used PG and about 2ml of BA in the first one and tried it at 25mg/ml but got a bunch of crystalization and couldnt get into all into solution, used plenty of heat and shaking and almost got it all but still a small amount of crystalization. Then I figured I might as well try a higher dose batch since it's not gonna fully susped either way, tried it at 40mg/ml and kept adding BA unti it was about 35mg/ml. Same thing. Oh well, I started it today and I just shake it up and drew without the syringe attached. Taste isnt bad but it numbs my tounge pretty good.
BCC let me know if you get it suspended alright at a higher dose.

[BCC]

Also with my winstrol I usually have to leave it on a decent amount of heat for a good half hour for the whole solution to go clear.