PDA

View Full Version : Flexing for the camera



Ute God
08-05-2006, 02:39 AM
Hey guys, been cruising the forums for a little while, with not much to say. Been training for the last 6 months, tripled my strength, improved my posture, now Im starting to cut.

http://i7.photobucket.com/albums/y291/utegod/1da78b96.jpg

Hmmm nothing much to it really. Was out in Sydney last night, posed for the camera, obviously didnt flex the right arm as much as the left but yeah you get the idea. I'll have to get you a proper shot one day, the "normal" self mirror portrait. Last measurements of the arms came in at 16.5 inches.

McVein
08-05-2006, 03:43 AM
obviously didnt flex the right arm as much as the left but yeah you get the idea. .


:zipit:

Clifford Gillmore
08-05-2006, 04:11 AM
What type of ute?

Ute God
08-05-2006, 05:24 AM
1990 VG with a 6L LS2, 6spd, Monaro Bonnet, Minitubed, 19x7 front 19x10 rear, R8 Coulsons, and stereo to boot....just to name a few mods.

Clifford Gillmore
08-05-2006, 08:08 AM
Excellent. WA has the biggest selection of VU's you could ever imagine, all with mack truck mud flaps. Yeeeesh.

KingWilder
08-05-2006, 11:19 AM
http://www.holden.com.au/www-holden/action/vehicleentry?vehicleid=15

McVein
08-05-2006, 11:20 AM
never heard of it

KingWilder
08-05-2006, 11:26 AM
Ute what's your current height and weight?

Ute God
08-05-2006, 06:31 PM
105kgs/231lbs
6ft/183cm

LivinItUp
08-05-2006, 06:38 PM
105kgs/231lbs
6ft/183cm


Just out of curiosity, are you bulking or cutting? Or do you just lift and pay somewhat attention to you're diet?

Ute God
08-05-2006, 06:50 PM
I pay alot of attention to my diet, I will be dropping 22lbs/10kgs in the next 3 months. Wont be hard.

Ute God
10-24-2006, 05:36 PM
Just an update, I slacked off for a little bit with the weight loss after dislocating my knee, but I currently weigh in at 97kgs/213lbs. I started at 112kgs/246lbs. So slowly getting there. The next bench mark is going to be 90kgs/198lbs. Hope to achieve that in the next 1.5-2months.

Fuzzy
10-25-2006, 03:40 AM
What is this world coing to??? some of these damn Yanks dont know what a Ute is!!!!!!!

You in Australia??? Where abouts?

1mmort4l
10-25-2006, 04:40 AM
Lol Fuzz. McVein is a Brit i think mate...

Im from Perth, what about you?

Fuzzy
10-25-2006, 05:14 AM
You Perth bastards, took it from the Crows... grrr

Hockey66
10-25-2006, 08:53 AM
Seeing as his location is Dublin, I'd assume he's from Ireland.

Ute God
10-25-2006, 09:32 AM
NSW here.

This is a ute:
http://memimage.cardomain.net/member_images/5/web/377000-377999/377262_162_full.jpg

McVein
10-25-2006, 11:54 AM
Seeing as his location is Dublin, I'd assume he's from Ireland.


;)

lol, cool licence plate

Keith
10-25-2006, 01:28 PM
Never knew what an ute was. I'm sorry I asked :p

piff
10-25-2006, 04:53 PM
It looks like the bastard child between an old Ford Taurus and an El Camino

Congrats on the cut, though. Good luck with the next 15 lbs

DAN13L
10-26-2006, 10:02 AM
Yeah, to the best of my knowledge, ute's aren't readily available in the USA. I think (and someone can correct me here) the only thing they have is the SUV's with the trays like the escalade.

That's it, I'm going to buy 10 Holden Maloo R8 utes, swap them to LHD and send them to the states.

Hockey66
10-26-2006, 10:47 AM
Those things are hidious.

EDIT: The cars, not your arms.

Ute God
11-02-2006, 07:06 PM
Also I was at 38% bf im now at 24%

McIrish
11-03-2006, 02:31 AM
Those things are hidious.

Seriously, it's like a midget escalade? Different strokes for different folks, I guess...

Three
11-03-2006, 08:48 AM
Wow, now I know why Utes aren't offered in the US. They would never sell here.

Edit: I didn't mean that to sound offensive. I meant people here would never give it a fair shake

Ute God
11-03-2006, 05:45 PM
Well mine is an older model. This one is one of my mates which is (i think) 03' model:

http://i19.photobucket.com/albums/b154/DR_UTE/Prefessional%20Pics/pic2.jpg

http://i19.photobucket.com/albums/b154/DR_UTE/Prefessional%20Pics/pic3.jpg

The newest ones that are out look tough, and we are still awaiting the launch of the VE version which I think will be sometime next year.

Bob
11-03-2006, 06:30 PM
Luv those Utes!!! I was in Sydney last year - July 05.. they were all over the place. It was almost identical to My second vehicle - 1982 Dodge Rampage..
http://upload.wikimedia.org/wikipedia/en/thumb/c/c1/1984Rampage.jpg/250px-1984Rampage.jpg
http://en.wikipedia.org/wiki/Dodge_Rampage
Except mine was black w/gold flecks.. bought it in 1984 from a little old lady with only 20k miles.. and drove that sucker into the ground at 220k.. drove it all across America - NY - Maine - Kansas - Colorado - California - Florida - NC.. until I finally sold it to a Junkyard who used it for carry stuff around the yard.

Do you know if the Utes are or were owned by Dodge?

And now Dodge is coming out with a new concept Rampage that's not quite the same:http://en.wikipedia.org/wiki/Dodge_Rampage_Concept

Anyway Ute God.. congrats on your progress..
Keep up the heavy lifting!!

Matt04
11-03-2006, 08:08 PM
Well mine is an older model. This one is one of my mates which is (i think) 03' model:

http://i19.photobucket.com/albums/b154/DR_UTE/Prefessional%20Pics/pic2.jpg

http://i19.photobucket.com/albums/b154/DR_UTE/Prefessional%20Pics/pic3.jpg

The newest ones that are out look tough, and we are still awaiting the launch of the VE version which I think will be sometime next year.

lovly VY there, any of you guys like the low lux's that plaige the roads these days? im over them

DAN13L
11-05-2006, 06:09 PM
Well at 300kw/530Nm torque capable of doing the 0-100km in 5.1 seconds, my guess is that it leaves the cadillac in the dust.

Levantar
11-05-2006, 10:25 PM
NSW here.

This is a ute:
http://memimage.cardomain.net/member_images/5/web/377000-377999/377262_162_full.jpg
This car........I don't like this car.

1mmort4l
11-06-2006, 12:42 AM
Luv those Utes!!! I was in Sydney last year - July 05.. they were all over the place. It was almost identical to My second vehicle - 1982 Dodge Rampage..
http://upload.wikimedia.org/wikipedia/en/thumb/c/c1/1984Rampage.jpg/250px-1984Rampage.jpg
http://en.wikipedia.org/wiki/Dodge_Rampage
Except mine was black w/gold flecks.. bought it in 1984 from a little old lady with only 20k miles.. and drove that sucker into the ground at 220k.. drove it all across America - NY - Maine - Kansas - Colorado - California - Florida - NC.. until I finally sold it to a Junkyard who used it for carry stuff around the yard.

Do you know if the Utes are or were owned by Dodge?

And now Dodge is coming out with a new concept Rampage that's not quite the same:http://en.wikipedia.org/wiki/Dodge_Rampage_Concept

Anyway Ute God.. congrats on your progress..
Keep up the heavy lifting!!


That looks a bit like an older model Falcon Ute. Like an XD XE or XF.
A bit like this one.. Best pic i could find in a hurry.. http://cgi.ebay.com.au/ford-xd-ute-v8_W0QQitemZ330046560902QQihZ014QQcategoryZ102226QQrdZ1QQcmdZViewItem#ebayphotohosting

jdeity
11-28-2006, 11:17 AM
It looks like the bastard child between an old Ford Taurus and an El Camino


:zipit:
laughed out loud

jdeity
11-28-2006, 11:18 AM
and i've gotta say that the front end of that car is such a rip off of a honda accord. maybe it was modded from one but it doesn't look like it was.

SaVvY
11-28-2006, 01:17 PM
Hey guys, been cruising the forums for a little while, with not much to say. Been training for the last 6 months, tripled my strength, improved my posture, now Im starting to cut.

http://i7.photobucket.com/albums/y291/utegod/1da78b96.jpg

Hmmm nothing much to it really. Was out in Sydney last night, posed for the camera, obviously didnt flex the right arm as much as the left but yeah you get the idea. I'll have to get you a proper shot one day, the "normal" self mirror portrait. Last measurements of the arms came in at 16.5 inches.
you tripled your strength in 6 months? meaning if your deadlift was 100kg, it went to 300kg? an this with all lifts?

Cirino83
11-28-2006, 01:59 PM
Hey guys, been cruising the forums for a little while, with not much to say. Been training for the last 6 months, tripled my strength, improved my posture, now Im starting to cut.

http://i7.photobucket.com/albums/y291/utegod/1da78b96.jpg

Hmmm nothing much to it really. Was out in Sydney last night, posed for the camera, obviously didnt flex the right arm as much as the left but yeah you get the idea. I'll have to get you a proper shot one day, the "normal" self mirror portrait. Last measurements of the arms came in at 16.5 inches.

Who actually flexes when out at what looks to be a bar when someone is taking a picture of you?? If anything i try to flex the traps or something that isn't noticable...but a double bi flex LOL :windup:

Ute God
12-12-2006, 05:43 AM
you tripled your strength in 6 months? meaning if your deadlift was 100kg, it went to 300kg? an this with all lifts?

Nah not all lifts (:newbie:). But alot. Ill have a look back in my diary and get some figures for you.


Who actually flexes when out at what looks to be a bar when someone is taking a picture of you?? If anything i try to flex the traps or something that isn't noticable...but a double bi flex LOL :windup:

Haha yeah well thats just me i guess!

Started taking hydroxycut today. Will see what sort of improvements i get from that. I sort of lost the motivation to bf for a while and the diet went to **** house. So back on track now i hope.

JHolmes145
12-12-2006, 11:54 AM
utes= reinvented el dorado

Ute God
12-12-2006, 02:14 PM
Can this thread please get deleted........its sooooooooooooooooo off topic