So I talked to the guys at Detroit Barbell about getting a shirt and they recommended I get a double ply open back rage X. Pretty simple but I'm not sure exactly what size I need. I weigh about 240 and JJ told me I would need something between like a 52 and a 56.
I think the shirt they had me in last time was a 56 dbl open some kind of high end phenom shirt. I got 80lbs out of it but it fit "comfy" more than tight. I'm a weak baby and my best bench yet was 315 off a 2brd (should be able to hit it straight in 2-3 weeks though).
Took some measurements unflexed and got chest 46 (edit: remeasured and I got 48), shoulders 53 or 54, and arms 17.
I think that would put me somewhere like 53-55, but I have no idea whether I would be getting a shirt that would be impossible to touch since I suck so bad...
Edit: I am also wondering if I would want stuff like scooped neck on the shirt, etc..? Don't want to spend the extra $$ on something that ain't gonna make much a difference, esp since it's a first shirt.
Last edited by OGROK; 11-09-2009 at 10:13 PM.
with a 46 chest I would think you would want a smaller size like 50-52, but with 17 arms and those shoulders you might want the bigger size, and is the 315 with a shirt on or raw? Most people would probably tell you to get a single ply, but I don't have too much experience with it, I got a used double ply ragex size 52 and have a 48 inch chest, it fits pretty tight on me and hard to get it up against the shoulders, but my first time using it I got 385 for a double first rep down to 3 board second rep down to about 2 board but it tore the crap out of the back side of my triceps. Waiting till probably this weekend to get heavy in the shirt when I have a crew to bench with.
I re-measured my chest and it actually seems to be a 48.
Last edited by OGROK; 11-09-2009 at 10:12 PM.
I am 5'9 255lbs, not sure on exact measurements but I know they are pretty similar to yours. I wear a sz50 2ply rage-x and it fits pretty good.
Are your arms 17 flexed or relaxed?
As far as mods to the shirt, I would suggest getting a scooped neck. Grid stitching is also nice, but may make the shirt harder to use for you.
To be honest this is a lot of shirt for your first shirt, but if you are training with a good group you should be fine. It takes me around 500lbs to touch in my rage-x.
960/530/749 @ 242
903/524/738 @ 220
Well, if I hold my arm extended straight out so it's not curled at all out I'm getting 15 or 15.5" or so, is that the measurement I'm looking for?
Last edited by OGROK; 11-09-2009 at 10:32 PM.
OGROK what is the most weight you have had in your hands eg: 440 5 board press?
Squat briefs only 625 @ 210
Bench geared 525 @ 210
Deadlift geared 650 @ 220
Captains of Crush #3
Building Mighty Mitts...
If I were you I would call Inzer and talk to someone, im sure they can hook you up.
My Training Log
My YouTube page
Training by Tone Barbaccio
New Dimensions Wellness & Education
Best geared meet @ 242
1030SQ, 640BP, 685DL and 2355 total
Best raw meet w/sleeves @ 242
665SQ, 440BP, 727DL and 1815 total
Best raw meet w/sleeves @ 275
700SQ, 452BP, 722DL and 1874 total
AtLarge Nutrition Supplements
The guy at Inzer said based on my chest measurement the standard size they would recommend is 52... But I'm not sure I would be able to touch in that, so should I go for the 54?
Last edited by OGROK; 11-10-2009 at 11:13 AM.
960/530/749 @ 242
903/524/738 @ 220
Yeah man but didn't you say you needed 500lbs to touch in the 50? 500lbs would crush me lol...
EDIT: Just heard back from Brent Mikesell, he said get the 52 and you guys are saying get the 52 so that's the plan..
Last edited by OGROK; 11-10-2009 at 02:41 PM.